manualshive.com logo in svg

NEC Univerge SV8100, Features And Specifications Manual

The NEC Univerge SV8100 System Hardware Manual is a comprehensive guide that provides detailed information on the functionality and operation of the SV8100 communication system. This invaluable manual can be freely downloaded from our website, ensuring easy access for users seeking in-depth knowledge on their NEC Univerge SV8100 product.

Share
Download
background image

UNIVERGE SV8100

Issue 13.0

IP Single Line Telephone (SIP)

2 - 833

IP Single Line Telephone (SIP)

Description

SIP (Session Initiation Protocol) is used for Voice over Internet Protocol.  It is defined by the IETF 
(Internet Engineering Task Force) RFC3261.  Other RFC designations, such as RFC3842, refer to a 
later implementation of SIP and may be supported by the UNIVERGE SV8100.  Commonly called SIP 
Station, this feature is used for IP Stations using SIP.

SIP analyzes requests from clients and retrieves responses from servers, then sets call parameters at 
either end of the communication, handles call transfer, and terminates.  Typically, such features, 
including but not limited to Voice over IP services, are available from an SIP service provider.

Each PZ-32IPLA/IPLB, PZ-64IPLA/IPLB, or PZ-128IPLA/IPLB application can support either 32, 64 or 
128 TDM Talk paths. This total may be shared among SIP Stations or SIP Trunks.  Registered SIP 
Stations and/or SIP Trunks require a one-to-one relation with the PZ-( )IPLA/IPLB DSP Resource.  This 
is a required component of SIP implementation in the SV8100.

The UNIVERGE SV8100 CD-CP00-US contains a regular TCP/RTP/IP stack that can handle real-time 
media, support industry standard SIP (RFC 3261) communication on the WAN side, and interface with 
the PZ-( )IPLA/IPLB.

Enhancements

With 

Version 4000

 software, FoIP (Fax over Internet Protocol) with T.38 protocol is supported.

The 

SV8100 Version 4000

 Enhancement license is required for T.38 to function.

With 

Version 4000 (4.01 or higher)

 software video codecs H.264, H.263 and H.261 are supported.

The 

SV8100 Version 4000

 Enhancement license is required for video support.

For Standard SIP video support, one SV8100 SIP video license is required per system.

With SV8100 

Version 5000 (5.00 or higher) 

software and PZ-IPLB daughter board installed, half 

duplex connections are not supported. For troubleshooting purposes, a managed switch capable of 
port mirroring is required to capture packet data from the SV8100 IPLB Ethernet port.

With 

Version 6000 (6.00 or higher)

, the SV8100 now supports both Attended and Unattended 

transfers. In previous versions, the SV8100 only supported Attended transfer.

With 

SV8100 Version 9000 (9.00 or higher)

 software, the system has the ability to receive DTMF 

information in SIP INFO messages sent by Standard SIP Terminals. This allows the SIP Terminal to 
initiate features during a ringing state such as Camp-On and Message Waiting.

With

 SV8100 Version 9500 (9.5 or higher)

 software, the SV8100 now supports NAT for Standard SIP 

terminals.

Summary of Contents for Univerge SV8100



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Univerge SV8100

Canon POWERSHOT A85 Quick Start Manual preview
POWERSHOT A85
Brand: Canon Pages: 318
Canon PowerShot G1 Software Starter Manual preview
PowerShot G1
Brand: Canon Pages: 114
Canon PowerShot G9 Getting Started Manual preview
PowerShot G9
Brand: Canon Pages: 36
Canon PowerShot Elph 340 HS IXUS 265 HS User Manual preview
PowerShot Elph 340 HS IXUS 265 HS
Brand: Canon Pages: 163
Canon PowerShot G1X Mark II Manual preview
PowerShot G1X Mark II
Brand: Canon Pages: 27
Canon PowerShot G7 System Map preview
PowerShot G7
Brand: Canon Pages: 2
Canon PowerShot G3 Manual preview
PowerShot G3
Brand: Canon Pages: 23
Canon PowerShot G3 Getting Started preview
PowerShot G3
Brand: Canon Pages: 9
Canon PowerShot N2 Manual preview
PowerShot N2
Brand: Canon Pages: 8
Canon PowerShot G3 Parts Catalog preview
PowerShot G3
Brand: Canon Pages: 23
Canon PowerShot G1 X Manual preview
PowerShot G1 X
Brand: Canon Pages: 2
Canon POWERSHOT PRO 1 Connection Manual preview
POWERSHOT PRO 1
Brand: Canon Pages: 2
Canon PowerShot G5 System Map preview
PowerShot G5
Brand: Canon Pages: 2
Canon PowerShot G5 Parts Catalog preview
PowerShot G5
Brand: Canon Pages: 25
Canon PowerShot G12 Basics Manual preview
PowerShot G12
Brand: Canon Pages: 6
Canon PowerShot G12 User Manual preview
PowerShot G12
Brand: Canon Pages: 214
Canon PowerShot G2 Parts Catalog preview
PowerShot G2
Brand: Canon Pages: 23
Panasonic KX-NS1000 Programming Manual preview
KX-NS1000
Brand: Panasonic Pages: 1182

Brands by name

Popular brands

Load more brands