manualshive.com logo in svg

NEC Univerge SV8100, Features And Specifications Manual

The NEC Univerge SV8100 System Hardware Manual is a comprehensive guide that provides detailed information on the functionality and operation of the SV8100 communication system. This invaluable manual can be freely downloaded from our website, ensuring easy access for users seeking in-depth knowledge on their NEC Univerge SV8100 product.

Share
Download
background image

UNIVERGE SV8100

Issue 13.0

SV8100 PoE Gigabit Switch

2 - 1559

SV8100 PoE Gigabit Switch

Description

The NEC PoE Gigabit Switch (GSWU) is a fully managed switch which brings gigabit speeds to users 
while adding a whole new level of intelligence and security to networks.

The eight 10/100/1000 Mbps ports enable users to take advantage of the Gigabit Ethernet interfaces. 
The NEC PoE Gigabit Switch supporting the UNIVERGE SV8100 and SV8300 system.

All user ports can support up to Gigabit Ethernet and may also support the primary Layer 2 protocols, 
with an emphasis on QoS features such as 802.1p and Diffserv.

The CD-ETIA blade has eight RJ45 ports for 10 BASE-T, 100 BASE-TX and 1000 Base-T along the 
front. The CD-ETIA design is based on one card and one software build. However, all the cards in the 
system are managed as a Master/Slave configuration. The Master provides full distributed Layer 2 
management to all Ethernet Switch cards in the system.

The CD-ETIA card can be a standalone card providing eight Gigabit Ethernet PoE ports. However, the 
real advantage with this card is that additional cards can be “stacked” by external “daisy chain” 
connections to provide up to 76 contiguous ports (all on the same managed domain/network). Below are 
the primary features of the card set.

Switches, unlike hubs, use 

microsegmentation

 to create collision domains, one per connected segment. 

This way, only the Ethernet devices which are directly connected via a point-to-point link, or directly 
connected hubs are contending for the medium.  By eliminating collisions, full-duplex point-to-point 
connections on the switch are possible.

When multiple blades requiring Ethernet data connections are installed in an UNIVERGE SV8100 
chassis, the CD-ETIA can provide a neat and simple installation.

The CD-ETIA is an in-skin, fast Ethernet switching hub unit that provides the following services:

Eight 10/100/1000 Gigabit Ethernet ports

PoE

802.3af compliant, supplies up to IEEE standard maximum 15.4W on eight 10/100/1000 ports Link/
ACT, POE System

Simplified QoS management using 802.1p, Diffserv or ToS traffic prioritization specifications

Granular security and QoS implementation

802.1Q based VLANs enable segmentation of networks for improved performance and security

Summary of Contents for Univerge SV8100



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Univerge SV8100

Panasonic KX-TG5779 Manual Del Instrucción preview
KX-TG5779
Brand: Panasonic Pages: 15
Panasonic KX-TG9391 Quick Manual preview
KX-TG9391
Brand: Panasonic Pages: 8
FujiFilm FINEPIX J27 Owner'S Manual preview
FINEPIX J27
Brand: FujiFilm Pages: 125
CamPro I826 Instruction Manual & Warranty Card preview
I826
Brand: CamPro Pages: 14
GE 28052EE2-A User Manual preview
28052EE2-A
Brand: GE Pages: 22
Uniden DECT1588-2 User Manual preview
DECT1588-2
Brand: Uniden Pages: 72
Doro PhoneEasy 331ph Manual preview
PhoneEasy 331ph
Brand: Doro Pages: 2
OPGAL EyeCGas 2.0 User Manual preview
EyeCGas 2.0
Brand: OPGAL Pages: 91
Panasonic LUMIX DMC-FZ1000B9 Owner'S Manual preview
LUMIX DMC-FZ1000B9
Brand: Panasonic Pages: 367
Laon People LPMVC-CL50M User Manual preview
LPMVC-CL50M
Brand: Laon People Pages: 67
Nikon COOLPIX S9400 Reference Manual preview
COOLPIX S9400
Brand: Nikon Pages: 252
Nikon Capture NX-D Reference Manual preview
Capture NX-D
Brand: Nikon Pages: 45
Polaroid Spectra AF User Manual preview
Spectra AF
Brand: Polaroid Pages: 31
FujiFilm FUJICA GSB45 Repair Manual & Parts List preview
FUJICA GSB45
Brand: FujiFilm Pages: 94
Insignia NS-DPF10PR (Spanish) Guía Del Usuario preview
NS-DPF10PR
Brand: Insignia Pages: 58
Unifat BTS30 User Manual preview
BTS30
Brand: Unifat Pages: 7
Kirisun DSJ-K9 User Manual preview
DSJ-K9
Brand: Kirisun Pages: 25
Aria 600 Programming Manual preview
600
Brand: Aria Pages: 233

Brands by name

Popular brands

Load more brands