NEC UNIVERGE SL2100 Installation Manual Download Page 56

Page: 56 / 136

To log an agent out of their ACD Group:

You can do this while either logged in or logged out.

Press the

Speaker

key.

Dial

668

Dial the ACD Agent's extension number.

You hear confirmation tone.

Press

Speaker

to hang up.

Assigning Agents to different ACD Groups

To assign an agent to a different ACD Group:

You can do this while either logged in or logged out. You must log out the ACD Agent before
reassigning them.

Press the

Speaker

key.

Dial

669

Dial the ACD Agent's extension number.

Dial the number of the ACD Group to which you want to assign the agent.

You hear confirmation tone.

Press

Speaker

to hang up.

SL2100

ISSUE 1.0

3-34

Supervisor, ACD System

Summary of Contents for UNIVERGE SL2100









































































































































Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands

NEC UNIVERGE SL2100, Installation Manual

Search results

Summary of Contents for UNIVERGE SL2100

Reviews:

Related manuals for UNIVERGE SL2100

Brands by name

Popular brands