NEC UNIVERGE NEAX 2000 IPS, Manual

Page: 149 / 244

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 139 –
NWA-008855-001 Rev.1.0
avch3001.fm
To display the calling information on PS when a call is terminated from an Attendant Console:
[Series 3500 software required]
• To display an attendant console name, do the following programming in addition to the programming
on
Page 136
.
DESCRIPTION DATA
Enter the desired ATTCON user’s name to
each ATTCON number by CM77 Y=A or
CM77 Y=B. •
(1)
(2)
Y=A By Character Code
0-7: ATTCON No. assigned by CM14/
CM10
Character Code 20-7F: Maximum 32 digits
See Character Code Table.
Page 141
•
(1)
(2)
Y=B By Character
0-7: ATTCON No. assigned by CM14/
CM10
A-Z, 0-9: Character
Maximum 16 Characters
NOTE: There are two ways to change a name that is currently programmed. (1) Overwriting with
a new name, or (2) inserting a blank space as the first character will cancel the existing
name.
Specify the calling information displayed on
PS when an Attendant Console calls a PS with
consultation holding the other station/trunk. (1)
(2) 554
0 : Information of holding call
(Station/Trunk information)
1 : Information of Attendant Console
A
CM77
CM08
END
WCS FEATURE PROGRAMMING