NEC UNIVERGE NEAX 2000 IPS, Configuration Manual, Page: 82 / 96

NEAX 2000 IPS Configuration Guide
Page 72
NDA-24347, Issue 1
Dterm IP Setup Chapter 7 Dterm IP
STEP 6: Press Exit keys (Softkey).
The User Menu appears on the LCD.
STEP 7: Select the setting item by pressing digit keys, and set the required data.
Then press Set key (Softkey). When you press the Set key, the LCD returns
to the Menu indication. Repeat settings for the required items.
Table 7-1 shows the setting items on the User Menu.
Table 7-1 User Menu Items
MENU
NO.
INDICATION SETTING DATA DESCRIPTION
1 DHCP Mode
1: DHCP Disable
2: DHCP Enable
Set when the DHCP is not
used.
Set when the DHCP is
used.
2
DRS Address
Primary
XXX.XXX.XXX.XXX
Enter the IP Address of
DRS System-based.
3
DRS Address
Secondary
- Not available
4 IP Address XXX.XXX.XXX.XXX
Enter the IP Address of the
Dterm IP.
• When DHCP server is
provided for the Dterm
IP, this setting is not
required.
5 Default Gateway XXX.XXX.XXX.XXX
Enter the Default Gateway
Address.
• When the DHCP server
gives the address, or
when no Gateway (no
router) is provided, this
setting is not required.
6 Subnet Mask XXX.XXX.XXX.XXX
Enter the Subnet Mask.
• When the DHCP server
gives the Subnet Mask,
or when no Subnet
Mask is required, this
setting is not required.