20
2. Projecting an Image (Basic Operation)
Adjusting horizontal/vertical position
The throw distance can affect the size and the height of the projected image. Before installing the projector, decide
the throw distance according to “Setting Up the Screen and the Projector” (
→
page
,
)
It is recommended to display the test pattern while adjusting the image. (
→
)
1. Move the projector back and forth and left and right so that
the image fits the screen width.
You can reduce the image size to 70% by using [DIGITAL ZOOM]
from the menu.
2. Place the projector so that it is parallel with the screen.
If the top side of the image is not parallel with its bottom side, rotate
the projector slightly to adjust it. If the side of the image shows
outside the screen, move it to the center line of the screen.
Adjusting the focus (Focus ring)
• Rotate the focus ring until you obtain the best focus.
Focus ring
(view from the bottom)
