NEC Display Solutions of America, Inc.
U321H Installation Guide
Desktop and Ceiling Mount
v1.0
www.necdisplay.com
U321H
Page 1 of 9
Contents
Product Description, Lens Specs, Notes and Formulas
Page 1
Diagrams and Distance Charts
Ceiling Mounted Installation
Page 2
Desktop Setup
Page 3
Cabinet Dimensions
Top, Bottom, Front, Left and Right Side
Page 4-5
Bottom
Page 6
Optional Wall Mount Dimensions
Page 7
Optional Wall Mount Dimensions cont. Page 8
Input Panel and Control Codes
Page 9
Product Description
Type:
0.65 inch DLP
Dimensions: 15.0”(W) x 4.3”(H) x 12.3”(D)
Weight:
10.4 lbs
Native Resolution: 1920 x 1080
Screen Range: 85.0” – 100.0”” Diagonal (16:9)
Brightness:
3200 lumens
Fan Noise: 34 dB / 29dB @ 1 meter
Power Consumption: 323W (max)
BTU’s:
1102.2 BTU/hour
Screen/Aspect Ratio_
Both 16:9 and 4:3 screens are fully supported
with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on 16:9 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary
5%.
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
16:9 Screen Formulas:
W
= Screen width
W
= H x 16/9
H
= Screen height
H
= W x 9/16
A
= Distance between projector cabinet and screen
Screen Diagonal
= W x 18.358/16
B
= Vertical distance between projector foot and screen center
C
= Throw distance
4:3 Screen Formulas:
D
= Vertical distance between projector foot and screen bottom
W
= H x 4/3
(screen top for ceiling mounted application)
H
= W x 3/4
Screen Diagonal
= W x 5/4