NEC SV8500, Manual

Page: 3311 / 3438

VOL.3-824
CHAPTER 4 CONFIGURATION SETUP
Note 6:
For firmware versions earlier than 4.0.0.0, the default is “Automatic.”
4. Call Func.
(Not Earlier than FW 2.0.0.0 but Earlier Than FW 5.0.0.0)
Not used. (This menu depends on the Telephony Server.)
3. Tool
(Not Earlier than FW 2.0.0.0 but Earlier Than FW 5.0.0.0)
Parameter Description Default
DT750
Series DT730
Series DT710
Series
3. Tool Starts up XML browser and Instant Message tool. - X X X
1. Service Starts up XML browser. - X X X
2. IM Not used. - - - -
5. Setting
(Not Earlier than FW 2.0.0.0 but Earlier Than FW 5.0.0.0)
Parameter Description Default
DT750
Series DT730
Series DT710
Series
1. User Setting Sets user interface related. - X X X
1. Incoming Call
Sets ringing and lamp indication data for
incoming call.
- X X X
1. Ring Volume Not used. - - - -
2. Offhook Ring
Selects whether to use offhook ringing
(ringing for incoming call in busy state).
Enable X X X
1. Disable Offhook ringing is OFF.
2. Enable Offhook ringing is ON.
3. Headset Ring Note 1 Selects whether to use headset ringing.
Disable X X - 1. Disable Headset ringing is OFF.
2. Enable Headset ringing is ON.
4. Ring Tone Note 2
Sets Ringing Tone for incoming call
termination.
- X X X
1. External Call
Note 5
Sets Ringing Tone for external call
termination.
Automatic X X
X 0. Automatic
Sets Automatic for the Ringing Tone of
incoming call termination.
1. Tone Type 1 ~ 14. Tone
Type 14
Sets Tone Type 1 ~ Tone Type 14 for
Ringing Tone.
15. Download 1 ~ 17.
Download 3
Sets Download 1 ~ Download 3 for
Ringing Tone.
N
2. Internal Call
Note 5
Sets Ringing Tone for station call
termination.
X 0. Automatic
Sets Automatic for the Ringing Tone of
incoming call termination.
1. Tone Type 1 ~ 14. Tone
Type 14
Sets Tone Type 1 ~ Tone Type 14 for
Ringing Tone.
15. Download 1 ~ 17.
Download 3
Sets Download 1 ~ Download 3 for
Ringing Tone.
N
3. IM Not used. - - - -
5. Illumination Note 2
Sets lamp indication pattern for
incoming call termination.
- X X -