NEC SV8300, User Manual, Page: 28 / 42

18
1.
Consecutive Speed Dialing
For Speed Dialing, all digits are registered as a Speed
Dialing Code. In the case of Consecutive Speed
Dialing, the common portion of the number is registered
as a speed calling code. The remaining digits of each
number are dialed by each individual calling station.
Example:
9 1 5 1 6 7 5 3 X X X X
Stored digits sent Additional digits by Speed Dial dialed
by caller
To dial a Consecutive Speed Dial:
1. Go off-hook and receive dial tone.
2. Dial the Speed Dialing feature access code.
3. Dial the abbreviated code.
4. Dial the remaining digits of the number or use a
DSS key to dial a stored Station Speed Dial
number.
Consultation Hold
This feature permits a station user to hold any incoming
or outgoing C.O. call, tie line call, or any calls within the
office while originating a call to another station user
within the system.
To hold the original call and place a second call:
1. Press the FLASH key (or momentarily press the
hookswitch).
2. The original call is placed on hold and receives
Music On Hold when provided.
3. Dial an internal station number and receive
ringback tone.
4. The second station answers. The original call is
now on Consultation Hold.
To return to the original call:
In any of the following cases, the calling station can
return to the original call by pressing the
FLASH key (or
momentarily pressing the hookswitch).
P
If the second station called is busy.
P
If the calling station cannot gain access to second
station due to restriction.
P
If the second station does not answer.