NEC SV Series, Quick Start Manual

Page: 4 / 6

4
Do Not Disturb
TO SET :
Press PROG soft key.
Press DND soft key.
Press SET soft key.
Choose which DND to set:
EXT: External, ICM: Internal, ALL: All incoming
calls, Cfwto: Call Forward to.
TO CANCEL :
Press PROG soft key.
Press DND soft key.
Press CNCL soft key.
Call Forward - Immediate (All
Calls)
TO SET:
Press SPEAKER 7 4 1 + 1.
Enter PHONE NUMBER ( 0 for External) then press
SPEAKER to exit.
TO CANCEL:
Press SPEAKER 7 4 1 + 0.
Enter PHONE NUMBER ( 0 for External) then press
SPEAKER to exit.
Call Forward - Busy/No Answer
TO SET:
Press SPEAKER 7 4 4 + 1.
Enter PHONE NUMBER ( 0 for External) then press
SPEAKER to exit.
TO CANCEL:
Press SPEAKER 7 4 4 + 0.
Enter PHONE NUMBER ( 0 for External) then press
SPEAKER to exit.
Flashing Light on the LED
To remove flashing Green light press the following
with the handset down:
Press
EXIT button, then MW soft key, then ALL
soft key.
To remove flashing
Red light press the following
with the handset down:
Press
SPEAKER * 8 and follow prompts to listen to
your message.
To Page
Page to All Handsets :
Lift handset and Dial 7 0 1 0.
Wait for the tone and then speak, hang-up to end
the Page.
Page to Speake/Amplifier :
Lift handset and Dial 7 0 3 0.
Wait for the tone and then speak, hang-up to end
the Page.
Programming a button -
Extension or External Number
Press the SPEAKER key.
Press 7 5 1.
Press the Function Key.
Dial
0 1.
Dial Extension number (e.g 103) or press 0
followed by the external number.
Press
HOLD.
Press SPEAKER.
Note: Programmable Function Keys can be erased
by dialling
SPEAKER 7 5 1 press the button to
erase and dial 0 0 .
Changing names:
Press SPEAKER 7 0 0 enter the Extension
Number.
Enter the Name using keypad.
Press
HOLD to save and press SPEAKER to exit.
Note: FEATURE button = Delete. # = Consecutive
letter on same key. ## = Space.
Back Ground Music
To turn it off / on:
Press SPEAKER 725 and press SPEAKER to exit
Change Ring tone:
Press SPEAKER 7 2 0 press 1 for Internal or 2 for
External.
Select ring tone 1-8 and press SPEAKER to exit.