3 - 2
CD-ETIA Blade Setup
___________________________________________________________________________________
___________________________________________________________________________________
Issue 3.0
SMB8000
1.3
Installing the CD-ETIA Blade in the Chassis
To install this blade with the system running:
1.
Insert the blade within the guide rail and push the blade securely into
position. Tighten the thumb screws on either side of the blade.
S
ECTION
2
SV8100
AND
SV8300 S
YSTEM
P
ROGRAMMING
SV8100 System:
The CD-ETIA blade can be programmed using a Multiline Terminal, PCPro or
WebPro.
1.
To program the system, the CD-ETIA blade should be installed in the desired
universal slot.
2.
Access System Programming press:
Speaker
#
Q
#
Q
[system password]
Transfer
.
Figure 3-1 Inserting Blades in the 19” CHS2U-US Chassis
Password
User
Name
Level
Programs at this Level
12345678
tech
2 (IN)
Installation (IN):
All programs in this section not listed below for
SA and SB
Summary of Contents for SMB8000
