NEC SL1000, Features And Specifications Manual

Page: 417 / 588

Private Line
Description
A Private Line is a trunk reserved for a multiline terminal for placing and answering calls. A user with a
Private Line always knows when important calls are for them. Additionally, the user has their own trunk
for placing calls that is not available to others in the system.
Conditions
• Incoming Only - The multiline terminal has a Private Line only for incoming calls. The user cannot
place calls on the Private Line.
• Outgoing Only - The multiline terminal has a Private Line only for outgoing calls. The Private Line
does not ring for incoming calls.
• Both Ways - The multiline terminal has a Private Line for both incoming and outgoing calls.
• Private Lines do not follow Call Forwarding if not Direct Inward Line (DIL).
• Other programmed options for outgoing calls also affect a Prime Line.
• Calls to extensions with DND active do not follow Call Forwarding programming. Direct Inward Line
(DIL) calls ring an idle Department Group member, then follow Program 22-08 then Program 22-05.
• An extension user can have Line Preference options applied to their Private Line.
•
A Private Line can also be a Prime Line.
• You should always program a line key for each Private Line.
• Private Lines are available on single line telephones.
• Private Lines follow normal Toll Restriction.
• An extension user can transfer their Private Line. If other users have hold access, the destination can
answer the transferred Private Line and place it on Hold.
• NEC does not recommend assigning ringdown to a private line.
Default Settings
Disabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Call Forwarding
Central Office Calls, Placing
Do Not Disturb (DND)
Line Preference
Prime Line Selection
Programmable Function Keys
ISSUE 1.0 SL1000
P
Features and Specifications Manual 1-409