E – 16
PC CONTROL
REMOTE
CONTROL
MOUSE
OUTPUT
MOUSE
OUTPUT
Serial cable (supplied)
Macintosh with USB
Port
IBM PS/2
Operating Your Computer Mouse with the Remote Control
Mouse adapter
(For IBM PS/2)
(supplied)
Mouse adapter (USB)
(supplied)
The built-in remote mouse receiver enables you to operate your computer's mouse functions from the remote
control. It is a great convenience for clicking through your computer-generated presentations.
To use the remote mouse function, connect the mouse output port of the rear projection display to your computer.
To connect the mouse output port:
1. Turn off your computer.
2. For PCs:Remove your current mouse and connect the supplied serial cable from the mouse output to your PC's mouse port.(Use the 6- pin
adapter for connecting to a PS/2 computer or the supplied USB adapter.)
For Macintosh:Attach the supplied mouse adapter for USB to the mouse output port's serial cable and connect the rear projection display to your
USB port of a Macintosh computer.
NOTE: When the built-in remote mouse receiver is available, it will disable your regular mouse. To use your regular mouse again, disconnect the serial cable and
restart.
NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change
your computer settings.
When connecting using the USB terminal:
For PC, the built-in mouse receiver can only be used with a Windows 98, Windows ME or Windows 2000 operating system.
NOTE: Wait at least 5 seconds after disconnecting the mouse adapter before reconnecting it and vice versa. The computer may not identify the built-in mouse receiver
if it is repeatedly connected and disconnected in rapid intervals.
