S
a
fe
ty
P
re
ca
u
ti
o
n
s
O
p
e
ra
ti
n
g
In
st
ru
ct
io
n
s
C
ar
e
an
d
M
ai
n
te
n
an
ce
Tr
o
u
b
le
sh
o
o
ti
n
g
T
ip
s
18
High
speed
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
Open the front
panel upward
Slide
Switch
Open the front
panel upward
Slide
Switch
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
Operation Details
Natural wind by the CHAOS logic
Helpful information
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the value when
the fan speed is set to high, and the capacity will be lower at low or
medium fan speed.
High fan speed is recommended when you wish to cool the room
quickly.
For more fresh feeling than other fan speed, press the Indoor Fan
Speed Selector and set to CHAOS mode. In this mode, the wind
blows like natural breeze by automatically changing fan speed
according to the CHAOS logic.
FORCED OPERATION
Operation procedures when the remote control can't be
used.
Open the front panel upward and move the Slide Switch to
the Forced Operation position.
If you want to stop operation, move the Slide Switch to the
Auto Restart or the Remote Control position.
In case the power comes on again after power failure on
the Forced Operation position, the operating conditions are
automatically set as follows:
During Forced Operation, the initial mode continues.
Slide Switch Operation
AUTO RESTART
In case the power comes on again after a power failure, Auto
Restarting Operation is the function to operate procedures
automatically to the previous operating conditions.
In case the air conditioner does not receive any signal from the
remote control, it will turn off automatically after 7 hours.
If you want to use this operation, Open the front panel upward
and move the slide switch to the Auto Restart position.
If you do not want to use this operation, move the Slide Switch
to the Remote Control position.
When you are out for a while, put the Slide
Switch on the REMOTE CONTROL.
Heat pump Model
Cooling Model
Room Temp.
≥
24°C
21°C
≤
Room Temp. < 24°C
Room Temp. < 21°C
Operating mode
Cooling
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
Healthy Dehumidification Rule
High
Setting Temperature
22°C
22°C
23°C
24°C
(1)
A30045A(w fl+)
1994.10.12
12:37
PM
’. 3 318
