NEC Ready 9734ES Pro Service And Reference Manual Download Page 61

Page: 61 / 76

Flash ROM 256 KB

Video Memory

Standard video memory

Fax/Modem models — 2 MB video memory on the system board

Ethernet models — 4 MB video memory on the graphics board

Calendar Clock

Year/Month/Day/Hour/Minute/Second/.01 Second; maintained by battery backup module

Battery Type Real Time Clock (RTC) battery module

Input/Output (I/O) Facilities

Integrated Industry-Standard Interfaces

Parallel bi-directional, ECP/EPP support; one 25-pin connector

Serial one high-speed RS-232C port using 16550 UART, supports transfer rates up to 19.2 KB per second; 9-
pin connector

Universal Serial Bus (USB) two USB ports, support two USB peripherals directly to the system; with
appropriate connector, each port supports up to 127 daisy-chained devices; supports 12 megabits (Mbs) per
second

Keyboard PS/2-compatible, 6-pin connector (mini DIN)

Mouse PS/2 compatible, 6-pin connector (mini DIN)

IDE dual IDE channels

one fast IDE and one standard IDE channel

CD-ROM reader and hard disk on separate channels

support for up to 10 MB/second 32-bit transfers on PCI bus

support for a total of four IDE devices; 40-pin connectors

support for mode 3 and mode 4

VGA Monitor — supports a VGA-compatible monitor (on fax/modem models)

Diskette Drive supports two diskette drives, 1.2-MB and 1.44-MB drives; 34-pin connector

Summary of Contents for Ready 9734ES Pro













































































Search results

Summary of Contents for Ready 9734ES Pro

Reviews:

Related manuals for Ready 9734ES Pro

Brands by name

Popular brands

NEC Ready 9734ES Pro, Service And Reference Manual

Search results

Summary of Contents for Ready 9734ES Pro

Reviews:

Related manuals for Ready 9734ES Pro

Brands by name

Popular brands