2. Installation and Connection
Express5800/R320c-E4, R320c-M4 User's Guide
70
Chapter 2 Preparation
2.4.1
Connecting to a uninterruptible power supply (UPS)
To connect the power cord of the server to the uninterruptible power supply (UPS), use the connector output on
the rear of the UPS. For details, refer to the manual supplied with the UPS.
When the power cord is connected to a UPS, the BIOS settings may need to be changed in order to link the
server with the power supply from the UPS.
To change the settings, select
Server
and then
AC-LINK
in the BIOS setup utility, and change the displayed
parameters. Select
Power On
to perform automatic operations by using the UPS. For details, refer to
Chapter 3
(1. System BIOS)
in "
Maintenance Guide
".
Option slot
Overload protection
reset button
Connector outputs
Input connector
(NEMA5-15P)
Voltage sensitivity setting button
Computer interface port (COM)
TVSS device connector
Example
Computer interface port (UPS)
Summary of Contents for R320c-E4
Page 20: ...Precautions for Use Be Sure to Read Express5800 R320c E4 R320c M4 User s Guide 20 CAUTION 44U...
Page 23: ...Precautions for Use Be Sure to Read Express5800 R320c E4 R320c M4 User s Guide 23 CAUTION NEC...
Page 25: ...Precautions for Use Be Sure to Read Express5800 R320c E4 R320c M4 User s Guide 25 CAUTION...