NEC R320c-E4, User Manual, Page: 56 / 89

2. Installation and Connection
Express5800/R320c-E4, R320c-M4 User's Guide
56
Chapter 2 Preparation
This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the
following procedure.
Checking accessories
The following are the required accessories. Check if you have them all.
– Bracket: 2
– Washer for panhead screw: 4
– Flat-head screw: 8
– Panhead screw: 8
Core nuts (4 pieces) are not included. Use the core nuts provided with the rack.
Checking the place to install
Decide the place (height) to install.
Next to the square hole of the rack, an imprinted mark is placed for 1U (This is the unit to show the height of the
rack). This device is as high as 4U (about 176 mm), so install it between the imprinted marks that indicate the
height of 4U.
Note
To keep balance, install it as low as you can on the rack.
刻印(5U単位に刻
印が2個ついてい
る)
コアナットの
取り付け位置
刻印
4U(本機
を取り付け
る高さ)
Imprinted mark (2
imprinted marks for
5Us)
Places to install
core nuts
4U
(the height for
installing this
device)
Imprinted mark