NEC PX750U Series Page 196 User Manual Download

Page: 196 / 243

182

8. User Supportware

Installation for Macintosh software

Image Express Utility 2 for Mac supports Mac OS X.

1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.

The menu window will be displayed.

2  Double-click the CD-ROM icon.
3  Double-click the “Mac OS X” folder.
4  Double-click “Image Express Utility 2 (Intel).dmg”.

The “Image Express Utility 2” folder will be displayed.

• If your Mac is PowerPC-based, double-click “Image Express Utility 2.dmg”.

5 Move the “Image Express Utility 2” folder to “Applications” folder using a drag-and-drop operation.

TIP:

• Uninstalling a software program

1. Put the “Image Express Utility 2” folder to the Trash icon.
2. Put the configuration file of Image Express Utility 2 to the Trash icon.

• The configuration file of Image Express Utility 2 is located in “/user/your user name/library/Preferences/jp.co.

nec.nevt. ImageExpressUtility.plist”.

Summary of Contents for PX750U Series




















































































































































































































































Search results

Summary of Contents for PX750U Series

Reviews:

Related manuals for PX750U Series

Brands by name

Popular brands

NEC PX750U Series, User Manual

Search results

Summary of Contents for PX750U Series

Reviews:

Related manuals for PX750U Series

Brands by name

Popular brands