Appendix C: Troubleshooting
Problem Solution
(5) Does not have all the
channels available after using
“Quick Scan”
(a) Try "Auto Scan" to scan all the channels again.
(all previously stored channels will be deleted).
(b) If you still cannot get some channels please use "Manual Scan”.
(6) Does not have all the
available channels after using
"Auto Scan”
(a) Try "Manual Installation" to scan these missing channels.
(7) Cannot lock signal by using
"Manual Scan"
(a) Check in the Manual Scan menu if the frequency of the selected
channel (displayed below the channel number) is exactly same as the
frequency used in your local area.
If not, change the frequency in this menu accordingly.
(8) Cannot receive all channels
after moving the receiver to
another city
(a) In the new area different channels are used.
-you can add the new channels in the “Manual Scan” menu.
- apply a new “Auto Scan or “Quick Scan”
(all previously stored channels will be deleted)
Appendix
C
