NEC POWERMATE VT 300 RELEASE NOTES Page 42 Manual Download

Page: 42 / 192

3-2 Configuring the System

This chapter provides information on configuring your
computer. The chapter includes information on the

American Megatrends, Inc. (AMI) BIOS Setup utility for
configuring hardware and the system

Flash utility for BIOS updates

NEC OS Restore CD for rebuilding the hard drive and/or
restoring the operating system

NEC Applications and Driver CD for installing the NEC
supplied applications and optional drivers

jumper settings for physically configuring devices in the
system.

See the following table for a quick guide to the utilities, tools,
or procedures required in configuring the system. For detailed
information about these and other tools, see the sections
following the table.

Configuration Tools and Utilities

The following table lists ways you can configure the system,
and the utility, tool, or procedure to use for the configuration.

Summary of Contents for POWERMATE VT 300 RELEASE NOTES

































































































































































































Search results

Summary of Contents for POWERMATE VT 300 RELEASE NOTES

Reviews:

Related manuals for POWERMATE VT 300 RELEASE NOTES

Brands by name

Popular brands

NEC POWERMATE VT 300 RELEASE NOTES, Manual

Search results

Summary of Contents for POWERMATE VT 300 RELEASE NOTES

Reviews:

Related manuals for POWERMATE VT 300 RELEASE NOTES

Brands by name

Popular brands