NEC PowerMate 2000 Series User Manual Download Page 52

Page: 52 / 137

3-16

Configuring the System

Advanced Menu

Menu Item

Settings (default is bold)

Floppy Disk Controller

Disabled,

Enabled

, Auto

Setting at Enabled allows the user to
configure the controller.

Setting at Auto enables the BIOS or
operating system to configure the controller.

Base I/O Address

Primary

, Secondary

Sets the base I/O address for the controller.

Large Disk Access Mode

Other,

DOS

Select DOS if using DOS operating system.

Select Other if using another operating
system such as UNIX or Novell NetWare.

Local Bus IDE Adapter

Disabled, Primary, Secondary,

Both

Enables the integrated local bus IDE
adapter.

QuickBoot Mode

Disabled

, Enabled

When Enabled, the BIOS does not test
system memory above 1 MB or wait for
ready signals, allowing a quick boot.

Sound

Enabled

, Disabled

Select Disabled to turn off onboard sound.

DMI Event Logging

Press

Enter

to access the following

submenus.

Event Log Capacity

Status only.

Event Log Validity

Status only.

View DMI Event Log

Status only, press

Enter

to view.

Summary of Contents for PowerMate 2000 Series










































































































































Search results

Summary of Contents for PowerMate 2000 Series

Reviews:

Related manuals for PowerMate 2000 Series

Brands by name

Popular brands

NEC PowerMate 2000 Series, User Manual

Search results

Summary of Contents for PowerMate 2000 Series

Reviews:

Related manuals for PowerMate 2000 Series

Brands by name

Popular brands