NEC PowerMate 2000 Series, User Manual

Page: 27 / 137

Reviewing System Features 1-17
!
Intel LANDesk
®
Client Manager
Use LANDesk software to track system information such as serial
number, BIOS version, memory capacity, disk capacity, expansion
board settings, and applications. Use LANDesk software for remote
starts from a server computer using Wake-On LAN and remote reboot.
NEC Product Recovery CD
Your system comes with an NEC Product Recovery CD and PowerMate
Recovery Boot diskette. Should a problem occur that causes data loss or
corruption, you can use the NEC Product Recovery CD to restore the
system to its original factory state or you can restore just the operating
system and drivers. A full system restore loads the operating system and
all the factory-supplied software that comes on the hard drive. See
“Product Recovery” in Chapter 3 for information about using the restore
options.
PowerMate Application and Driver CD
Use the PowerMate Application and Driver CD to install drivers for NEC
system options that are not part of the factory configuration. Also use the
PowerMate Application and Driver CD to reinstall NECC-supplied
software. See “PowerMate Application and Driver CD” in Chapter 3 for
information about installing drivers from the CD.
Security
The system has hardware, software, and mechanical security features that
offer protection against unauthorized access to your system and data. The
following security features are available with the system.
!
Password Security
The BIOS Setup utility includes a feature that lets you set a user or
supervisor password, or both.
The user password controls booting of the system and controls access
to the Setup Utility and the keyboard. (User access to the BIOS Setup
Utility is limited to a subset of all BIOS Setup parameters when a
supervisor password has been set.)
The supervisor password allows full access to the system and the
BIOS.