6 NEC PowerMate 2000 Series Release Notes
Correcting the BootMagic Configuration
If you installed BootMagic in a system with the Windows NT operating system and the
installation resulted in an error message, use the following procedure to correct the configuration
information.
1.
In the Windows Start menu, select
Programs
,
PowerQuest BootMagic
, and
BootMagic
Configuration
. The BootMagic Configuration box appears.
Nothing should be listed under the MENU NAME heading in the center of the box.
2.
Click
ADD
. The “Bootmagic Add OS” box appears. This is the only option listed and it is
already highlighted.
3.
Click
OK
. Click
OK
again. The main BootMagic Configuration screen appears with
“Windows NT” listed under MENU NAME.
4.
Check the BootMagic configuration.
If you want to use BootMagic:
Click the
ENABLE BOOTMAGIC
button. The BootMagic menu appears during the next
bootup sequence and lets you select Windows NT as the operating system.
If you do not want to use BootMagic:
Do not select the
ENABLE BOOTMAGIC
button. The BootMagic menu does not appear
at bootup.
5.
Select
SAVE/EXIT
in the BootMagic Configuration box. Either choice, to enable BootMagic
or to not enable BootMagic, requires the SAVE/EXIT selection.
To correctly complete the BootMagic configuration, you must select
SAVE/EXIT from the BootMagic Configuration box, even if you do not want to use BootMagic.
Omitting this step results in an error message.
System Configuration
See the following sections for system configuration information.
Configuring the System for the NEC SNMP Agent
TCP/IP must be enabled before you can use the NEC SNMP Agent. See “Changing Network
Settings” in this document to enable TCP/IP. See “Installing Applications in the Correct Order”
in this document and “NEC SNMP Agent” in Chapter 4 of the PowerMate 2000 Series User’s
Guide for installation information.
Configuring the System for NEC WebTelligent
TCP/IP must be enabled before you can use NEC WebTelligent. See “Changing Network
Settings” in this document to enable TCP/IP. See “NEC WebTelligent” in Chapter 4 of the
PowerMate 2000 Series User’s Guide for detailed installation information.
