P
LASMA
M
ONITOR
†
E-19
Basic Operation
To view a video source:
Press the VIDEO button.
Displays the image from the equipment connected to the VIDEO
IN connector.
• See page E-15 for connection.
To view the image from a computer,
DVD player or HD laser disc player:
Select [RGB] or [DVD/HD] for RGB 2 from the INPUT SELECT
menu.
Press the source button (RGB 1, RGB 2/DVD/HD, or RGB 3)
Displays the image from the computer, DVD player or HD laser
disc player connected to the selected RGB input connector.
• You can select the source also by using the RGB button on the
front panel.
To do this, each press of the RGB button selects [RGB 1]
→
[RGB 2] or [DVD/HD]
→
[RGB 3] in sequence.
• See page E-11 for connection.
NOTE:
* The default input is the last input used, but the plasma monitor can be
configured to display either the last input used or a preset input when-
ever it is used turned on. (See "Power-On Mode Setting" on page E-37.)
* During RGB3 mode the power management function is available in Off-
state only. (This is Active-off Power state in DMPM of DVI standard.)
An image will be displayed in 4 seconds after TMDS signal is returned.
Important
Notes on the POWER/STANDBY lamp on the plasma monitor
* The POWER/STANDBY lamp 's flashing in alternately green and orange,
or flashing in green only indicates that the plasma monitor detects an
error. Should this happen, power off the plasma monitor immediately
and contact your dealer:
Selecting a computer or video source
POWER/STANDBY Lamp Status
Normal
Error
Main Power ON
Timer enabled
Power OFF with remote control
Main Power Standby
Abnormal heat warning
Panel damaged
Green
Orange flashing
Orange
Orange
Green flashing
Green and/or Orange flashing
Status
POWER/STANDBY lamp
When Using Power Management Function
NOTE:
In some cases the fan may stop running. This is not a malfunction.
This plasma monitor follows the VESA approved DPMS Power
Management function.
The power management function is an energy saving function that
automatically reduces the power consumption of the display when
the keyboard or the mouse has not been used for a fixed period.
The status of power management can be checked by POWER/
STANDBY lamp display.
See page E-39.
Summary of Contents for PlasmaSync 50PD2
