NEC PlasmaSync 50PD2, User Manual

Page: 111 / 137

E-40
†
P
LASMA
M
ONITOR
Other Functions (OTHER SETTINGS)
When using more than one of these monitors, this function sets ID
numbers so that operation of the remote control does not cause
multiple monitors to operate at the same time.
(These ID numbers can also be used for control with RS-232C.)
The optional remote control is required to operate the plasma
monitors for each ID number independently. (These ID numbers
also need to be assigned.)
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
4
1
Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
buttons.
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA MODE
ALL RESET : AUTO
: OFF
: ALL
: 1
: ON
: LAST MEM
: AUTO
: OFF
: ALL
: 1
: ON
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA MODE
ALL RESET
: LAST MEM
Align the cursor with SET ID NO
Set the ID number with the POSI-
TION/CONTROL buttons
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
Press the EXIT button 2 times
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the
PROCEED button will return all the settings of the other
functions to the default settings. (The ID number will be-
come [ALL].)
ID Number Setting (SET ID NO)
[ALL] : ID number will not be set.
[001 to 256]: ID number will be set.
Adjust this setting when the RGB 3 image is not stable.
Set [OSD MODE] to [PRO] on the configuration menu, then per-
form the following operations.
Preparation Press the PROCEED button to display the main
menu.
1
Align the cursor with
2
3
Move the cursor left and right with
the POSITION/CONTROL
buttons.
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA MODE
ALL RESET : AUTO
: OFF
: ALL
: 1
: ON
: LAST MEM
: AUTO
: OFF
: ALL
: 1
: ON
COLOR SYSTEM
P-ON MODE
POWER MANAGER
SET ID NO
RGB3 ADJUST
CINEMA MODE
ALL RESET
: LAST MEM
Align the cursor with RGB 3 ADJUST
Use the POSITION/CONTROL buttons to set
the number that provides the best image
Move the cursor up and down with
the POSITION/CONTROL
▲▼
buttons.
RGB 3 Adjustment (RGB 3 ADJUST)
4
Press the EXIT button 2 times
When the screen is not stable at [1] (the initial value), set the
adjustment to [2] or [3].
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the
PROCEED button will return all the settings of the other
functions to the default settings.
Note:
Making this adjustment will cause the display position to change.
To compensate, set [AUTO PICTURE] (of the [Auto Picture/Wide Screen
Settings]) to [OFF] and then to [ON], or readjust the display position.