E-11
Side View.... Terminal Board L/R
10
11
12
13
A
C-IN
OUT
IN
RGB1
HIGH 75
Ω
RGB2
VIDEO
G
B
H/CS
V
R
S-VIDEO
10
DIP SW
Sets the various modes of this unit.
11
RGB3 (DVI 29pin)
IN connector: Inputs a digital RGB signal. (TMDS)
Note:
This connector does not support analog input.
12
REMOTE (Mini jack)
IN jack: This jack connects the wired remote control.
THROUGH OUT jack: Outputs as is the remote con-
trol signal that is connected to the REMOTE IN jack.
* This is used when operating multiple monitors (i.e., of
this unit) with a single remote control.
13
EXTERNAL CONTROL (mini D-Sub 15 pin)
Controlled by the computer’s RS-232C interface.
IN connector: Used when operating this unit with
EXTERNAL CONTROL from a personal computer.
THROUGH OUT connector: Outputs as is the signal
that is input to the EXTERNAL CONTROL IN con-
nector.
14
CONTROL LOCK
When “CONTROL LOCK” is set to “ON”, the buttons
on the set’s front bezel control panel do not function.
14
15
16
17
18
15
VIDEO
IN [BNC] connector (BNC): Inputs the video (com-
posite video signal).
IN [S] connector (DIN 4 pin): Inputs the S video (Y/
C separate signal).
* When connections are made to both the BNC connec-
tor and the S video connector, the signal of the S video
connector has priority.
THROUGH OUT [BNC] connector (BNC): Outputs
the same signal connected to the VIDEO IN [BNC]
THROUGH OUT [S] connector (DIN 4 pin): Out-
puts the same signal connector to the connector. con-
nector.
16
RGB2 [R, G, B, H/CS, V] (BNC)
IN connector: Inputs the analog RGB signal.
The H/V composite signal is connected to the H/CS
connector.
THROUGH OUT connector: Outputs as is the signal
input to the RGB2 IN connector.
75
Ω
/HIGH switch: This switch selects the impedance
of the connector. It is usually used in the “75
Ω
” posi-
tion.
17
RGB1 (mini D-Sub 15 pin)
IN connector: Inputs the analog RGB signal of a per-
sonal computer, etc.
18
AC IN connector
Connects with the supplied power cable.
Insert the prongs completely.
* for PLUGGABLE EQUIPMENT, tee
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Summary of Contents for PlasmaSync 42PD2
