User’s Manual U15260EJ3V1UM
41
CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
4.1
Introduction
Before you start using the PG-FP4, download the parameter file for the target device (.PRM) to the PRM folder.
<Downloading the parameter file>
The PRM file is not part of the PG-FP4 software package.
It has to be downloaded from the NEC Electronics Website at http://www.necel.com/micro/ods/eng/index.html.
The PRM file downloaded from the NEC Electronics Website must be copied into the sub-directory <PG-FP4 install
path>\PRM which was created during GUI software setup (see
CHAPTER 3 SOFTWARE INSTALLATION
). If no
PRM file has been installed before, the GUI software will report a fatal error and it will not startup.
Figure 4-1. Fatal Error: No Parameter File Installed
