background image

5. Making Connections

90

Attaching the USB Wireless LAN Unit

NOTE:

•  The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in 

the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port 
may break.

•  Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge 

the static electricity from your body.

•  Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunc-

tion or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power 
cord, and then connect it again.

•  Do not insert other USB devices into the USB (wireless LAN) port in the wireless LAN cover. Do not insert the USB Wireless LAN unit 

into the USB port.

NOTE:

•  When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit.

1.  Press the POWER button to turn off the pro

-

jector and set it into standby condition, and 

disconnect the power cord.

2.  Remove the wireless LAN cover.

(1)  Turn the screw counterclockwise until it 

turns freely.

(2)  Hold the head of the screw and remove.

Summary of Contents for PE455UL
















































































































































































Reviews: