60
4. Using the Viewer
❸
Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar is set to the factory default.
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
Starting the Viewer
1. Turn on the projector. (
→
page
14
)
2. Insert the USB memory into the USB port of the projec
-
tor.
NOTE:
• Do not remove the USB memory from the projector while it’s LED
flashes. Doing so may corrupt the data.
TIP:
You can a USB memory insert the projector when the drive list screen
is displayed.
3. Press the SOURCE button to select [VIEWER].
A press of the SOURCE button will display the source select
screen.
A few more presses of the SOURCE button will display the
drive list screen.
Another way to select [VIEWER] is to press the VIEWER
button on the remote control.
TIP:
• For more information about the drive list screen, see page
64
.
• To display graphics in a shared folder, see page
72
; to display still
images or movie files in a media server, see page
76
.
