170
8. User Supportware
Projecting Your Computer’s Screen Image from the Projector
over a LAN (Image Express Utility Lite)
Using Image Express Utility Lite allows you to send the computer’s screen image to the projector over a wired or
wireless LAN.
This section will show you an outline about how to connect the projector to a LAN and to use Image Express Utility
Lite. For the operation of Image Express Utility Lite, see the help of Image Express Utility Lite.
What you can do with Image Express Utility Lite
• Image transmission
• The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable
(VGA).
• By using “EASY CONNECTION” function, the complicated network settings can be simplified and the computer
will automatically connect to the projector.
• The screen of your computer can be sent to up to four projectors at the same time.
• Geometric Correction Tool (GCT)
See “
❹
Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)”.
Connect the projector to a LAN.
Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (
→
page
150
), “Con-
necting to a Wireless LAN (sold separately)” (
→
page
151
) and “9 Application Menus - NETWORK SETTINGS” (
→
page
120
)
Start Image Express Utility Lite.
1. On Windows, click “Start”
→
“All programs”
→
“NEC Projector UserSupportware”
→
“Image Express Utility
Lite”
→
“Image Express Utility Lite”.
Image Express Utility Lite will start.
The select window for network connection will be displayed
2. Select Network and click “OK”.
The select window for destination will show a list of connectable projectors.
• When connecting the computer directly to the projector by one-to-one, “Easy Connection” is recommended.
• When one or more networks for “EASY CONNECTION” are found, the “Easy Connection Selection Screen”
window will be displayed.
• To check for the network available for connected projectors, from the menu, select [INFO.]
→
[WIRELESS
LAN]
→
[SSID].
3. Select “Easy Connection” network you wish to connect, and click “Select”.
The target selection window will be displayed.
4. Place a check mark for projectors to be connected, and then click “Connect”.
• When one or more projectors are displayed, from the menu on the projector, select [INFO.]
→
[WIRELESS LAN]
→
[IP ADDRESS].