183
8. User Supportware
❶
Operating Environment for Software Included on CD-ROM
Names and Features of Bundled Software Programs
Name of software program
Features
Virtual Remote Tool
(Windows only)
When connecting the computer and projector using the network (wired LAN),
the Virtual Remote screen will appear in the computer screen and operations
such as signal switchover and power on/off of the projector will be possible. It
is also possible to send an image to the projector and register it as the back-
ground logo. Once the image is registered, it can be locked to prevent the logo
from being overwritten.
Image Express Utility Lite
• This is a software program used to project your computer’s screen, stream-
ing movie, or sound from the computer over the wired/wireless network. The
computer cable (VGA) is not required. (
→
page
)
• This software program can be used to control the power ON/OFF and source
selection of the projector from your computer.
• The Geometric Correction Tool (GCT) and audio function allows you to cor-
rect distortion of images projected on a curved wall. (
→
) The GCT
function is not available for streaming video.
Image Express Utility Lite for
Mac OS
• This is a software program used to project your computer's screen over the
wired/wireless network. The computer cable (VGA) is not required. (
→
page
)
• This software program can be used to control the power ON/OFF and source
selection of the projector from your computer.
Image Express Utility 2.0
(Windows only)
• This is a software program used to send the screens of your personal comput-
ers to the projector via wired/wireless LAN (Meeting mode).
Projected images can be transferred and saved to personal computers.
When “Meeting Mode” is used, projected images can be sent and saved to
the personal computers. Images can be sent from a personal computer to
not only one projector but also to two or more projectors at the same time.
(
→
page
)
Desktop Control Utility 1.0
(Windows only)
• This is a software program used to operate the desktop screen of a personal
computer at a remote location by using a projector via wired/wireless LAN.
(
→
page
)
PC Control Utility Pro 4
PC Control Utility Pro 5 (for Mac
OS)
This is a software program used to operate the projector from the computer when
the computer and the projector are connected with LAN. (
→
page
)
• PC Control Utility Pro 4 can be used with a serial connection.
NOTE:
• Transmission using a wireless LAN is not possible for HDBaseT models.
• To connect the projector to the network by using the Virtual Remote Tool, PC Control Utility Pro 4, PC Control Utility Pro 5, please
configure the settings of [SETUP]
→
[NETWORK SETTINGS] in the on-screen menu (
→
).
MM models does not support the connection to the wired LAN/wireless LAN configured in [NETWORK SETTINGS (MM)] (
→
page
• Image Express Utility Lite does not support "Meeting Mode" in Image Express Utility 2.0 included with our other models.
• For MM models, take note of the following point when using the three software (Image Express Utility Lite (for Windows and Mac
OS), Image Express Utility 2.0, Desktop Control Utility 1.0) in the [NETWORK STANDBY] mode.
When the projector is in the [NETWORK STANDBY] mode, communications will not be possible for about 20 seconds after the
power supply of the projector is turned on.