1. Check the product overview, supplied items and part names
5
1-3. Part Names of the Projector
Front
The lens is sold separately. The description below is for when the NP54ZL lens is mounted.
1
2
3
8
6
5
4
7
6
9
1. Exhaust vent
Heated air is exhausted from here.
2. Controls
The projector’s power can be turned ON/
OFF, and the signal for the projected image
can be switched here.
3. Adjustable Tilt Foot
Rotate the tilt feet to adjust the left/right
orientation.
4. Intake vent
Takes in outside air to cool the unit.
5. Indicator Section
The indicator light turns on or blinks to
relay the status of the projector (Power ON/
Standby/etc.)
(
→
page
8
,
191
)
6. Remote Sensor
This part receives signals from the remote
control. There are two locations on the front
and back of the projector.
7. Lens
Images are projected from here. (Lens unit
sold separately.)
8. Lens Cap
(The optional lens is shipped with the lens
cap.)
9. Lens cover
Remove this when installing and removing
a lens unit.