NEC PA1705UL-W Installation Manual Download Page 35 | Manualshive

Page: 35 / 228

NEC PA1705UL-W Installation Manual Download Page 35

Important Information

xxxiv

Trademarks

• Cinema Quality Picture logo, NaViSet, ProAssist, and Virtual Remote are trademarks or registered

trademarks of Sharp NEC Display Solutions, Ltd. in Japan, in the United State and other countries.

• PowerPoint is either a registered trademark or trademark of Microsoft Corporation in the United

States and/or other countries.

• The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI

Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

• Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America

and other countries and areas.

• Blu-ray is a trademark of Blu-ray Disc Association.
• CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and other countries.

•  Extron and XTP are registered trademarks of RGB Systems, Inc. in the United States.
•  Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.
•  Art-Net is an Ethernet protocol invented by Artistic Licence.
  Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
•  Other product and company names mentioned in this user’s manual may be the trademarks or

registered trademarks of their respective holders.

• Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.

«
...
33
34
35
36
37
...
»

Summary of Contents for PA1705UL-W





































































































































































































































Reviews:

No comments