Figure F.1
Quick Start cont.
4
Power
Cord
Power Outlet
the BNC connector on the monitor labeled HS/CS. If you have a fifth BNC connector
(Vertical Sync), connect it to the BNC connector on the monitor labeled VS
(Figure D.1).
NOTE: Incorrect cable connections may result in irregular operation or damage
display components.
4. Connect one end of the power cord to the MultiSync
®
P
1250
+
™
monitor and the other
end to the power outlet
(Figure E.1)
.
5. Turn on the monitor
(Figure F.1)
and the computer.
NOTE: For download information on the Windows
®
95/98 INF file for your MultiSync
P
1250
+ monitor, refer to the
References
section of this user’s manual.
NOTE: If you have any problems, please refer to the
Troubleshooting
section of
this User’s Manual.
RESET BNC/D-SUB SW
PROCEED
OL
MultiSync P
1250+
Power Button
Figure D.1
Figure C.2
Figure B.2
Figure E.1
BNC
Connector
R G(/Sync) B
VS
HS/CS
78133694
11/18/98, 11:34 AM
6