Step 8
1.
Insert standard straight through Ethernet cable into OPS
PC network port and connect to client network.
2.
Now that the OPS PC is installed and the network
connection is in place, connect the power cord to the
display.
3.
Stand the display upright and turn on the power (power
switch is located beside the power cord)
4.
Using either the remote or the buttons on the display, select
the OPTION input. (Will show Option D on the display)
5.
Verify the display powers on and that Windows starts up.
6.
Rise Display content should automatically start playing in a
few minutes.
7.
Now that the LCD and OPS PC have been verified to work
properly, disconnect the Ethernet cable, power down the
display, and proceed with the installation of the LCD.
Revised 12-30-2011
Page
6
