background image

   

NEC Display Solutions of America, Inc.

        

OL-V323-2 Installation Guide 

10 Point Touch Overlay for the V323-2

 

 

 

 

 

 

 

 

       

Rev.1.2 

 

www.necdisplay.com

  

 

 

 

 

 

 

 

 

OL-V323-2              

 

4.0 

Equipment 

4.1 

(1) 

OL-V323-2 IR touch screen overlay 

(4) 

Bezel retention brackets for OL-V323-2  

Note: Brackets attached to the overlay 

(1) 

6-32 x 3/8" Undercut Phillips Machine Screws 

Note: Quantity (1) Machine Screw Provided as Spare 

(1) 

10ft. USB Extension Cable 

 

5.0 

Dimensional Drawings 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for OL-V323-2

Page 1: ...ontains tempered glass Use caution when handling 3 2 The overlay has an integrated USB cable located in the bottom right corner Ensure the cable is not pinched crushed or damaged during installation 3 3 Ensure the touch screen frame does not bend or torque during installation 3 4 Once the touch screen is installed do not lift the monitor by grasping or holding only the touch screen overlay Grasp b...

Page 2: ...2 www necdisplay com OL V323 2 2 4 0 Equipment 4 1 1 OL V323 2 IR touch screen overlay 4 Bezel retention brackets for OL V323 2 Note Brackets attached to the overlay 1 6 32 x 3 8 Undercut Phillips Machine Screws Note Quantity 1 Machine Screw Provided as Spare 1 10ft USB Extension Cable 5 0 Dimensional Drawings ...

Page 3: ... THE BRACKET ORIENTATION BY TAKING NOTE OF THE SPECIFIC LOCATION OF EACH BRACKET AS THEY ARE NOT ALL THE SAME 6 3 1 Retain screws for reuse 6 4 Clean inside surface of the glass 6 4 1 Use a glass cleaner or mild cleaning solution to clean glass 6 4 2 Spray solution onto clean soft cloth then wipe the surface Spraying cleaning solution directly onto the monitor may damage the unit 6 4 3 Use circula...

Page 4: ...EMOVED FROM TO SECURELY MOUNT THE OVERLAY 6 6 1 Slide the bezel retention bracket from the rear of the monitor between the bottom of the monitor and the touch frame bezel 6 6 2 Align the bracket screw hole with the bezel Attach the bezel retention bracket to the bezel with the 6 32 x 3 8 undercut screws previously removed in Step 6 3 6 6 3 Repeat for remaining three 3 brackets 6 7 Connect the touc...

Reviews: