NEC NP4100 Series User Manual Download

Page: 6 / 158

Important Information

•

If you wish to have the projector installed on the ceiling:

Do not attempt to install the projector yourself.

The projector must be installed by qualified technicians in order to ensure proper
operation and reduce the risk of bodily injury.

In addition, the ceiling must be strong enough to support the projector and the in-
stallation must be in accordance with any local building codes.

Please consult your dealer for more information.

CAUTION:

When shipping the projector, remove the optional lens beforehand. The lens
and the lens shift mechanism may encounter damage caused by improper
handling during transportation.

Place the projector in a horizontal position

Do not put the projector on its side when the lamp is turned on. Doing so may cause
damage to the projector.

CAUTION:

Do not drop the projector on your hand or fingers while lifting the projector to
replace the filters. Doing so could injure your hand or fingers.

Summary of Contents for NP4100 Series































































































































































Search results

Summary of Contents for NP4100 Series

Reviews:

Related manuals for NP4100 Series

Brands by name

Popular brands

NEC NP4100 Series, User Manual

Search results

Summary of Contents for NP4100 Series

Reviews:

Related manuals for NP4100 Series

Brands by name

Popular brands