7
Align the projector adapter with the holes on the bottom of the projector and securely attach
the adapter with the four supplied screws (M4x20).
Loosen the vertical adjust/arm fixation knobs of the projector adapter.
Vertical adjust/arm fixation knobs
Warning
are used, the projector may be seriously
damaged, or the projector may fall and
cause injury. Be sure to use only the
supplied screws.
2. Attach the wall adapter to the structural material of the wall.
To ensure a projected image without distortion, the center of the wall adapter and the center of
the screen should be aligned on a straight axis.
•
The wall adapter has a top/bottom orientation. Be sure to attach it with correct orientation.
Caution
If the wall adapter is mounted with reversed top/bottom orientation, correct
installation is not possible.
•
The wall adapter can be adjusted horizontally over a range of ±50mm.
Side with cutouts facing up
Side without cutouts facing down
Warning
If screws other than the supplied ones
Mounting the Projector
Use only M6 (1/4 inch) screws
or bolts (4 locations) to fix the wall
adapter. If screws or bolts other than M6
are used, the pr
ojector may fall and
cause injury.
the installation position of the wall mount unit.
1. Determine the installation location of the screen, and accordingly decide
Refer to the section "Installation" in the user’smanual included with the projector for more
information.
•
Installation for slanted projection is not possible. Determine the position for frontprojection.
on page 2 of this manual are met.
•
Because the M260XS/M300XS/M350XS/M260WS/M300WS have a large optical axis
elevation angle, a slight shift in projection distance will have a large effect on the screen
size and position. If the projector angle is off, image distortion will increase.
Preparations
2. Make sure that all conditions described in the section "Heed the Following"
1
2
1
2
