NEC NP-UM301W User Manual Download

Page: 127 / 152

116

6. Installation and Connections

NOTE:When the cable cover is attached, remove it before inserting the USB
Wireless LAN Unit.

1. Press the POWER button to turn off the projector and set it

into standby condition, and disconnect the power cord.

2. Slowly insert the USB Wireless LAN Unit into the USB (WLAN)

port.

Remove the cap from the USB Wireless LAN Unit, and then insert

it with the surface (side of indicator) facing outward. Keep the cap
for later use.

NOTE: Do not force to insert the USB Wireless LAN Unit.

To remove the USB Wireless LAN Unit, disconnect the power cord

and use the above procedure.

NOTE:
• The green LED on the USB Wireless LAN Unit flashes to show that Wireless

LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached,
the blue LED will not flash.

• Do not press the button on the USB Wireless LAN Unit. The button will not

work with this model.

Summary of Contents for NP-UM301W

























































































































































Search results

Summary of Contents for NP-UM301W

Reviews:

Related manuals for NP-UM301W

Brands by name

Popular brands

NEC NP-UM301W, User Manual

Search results

Summary of Contents for NP-UM301W

Reviews:

Related manuals for NP-UM301W

Brands by name

Popular brands