25
... English
Installation
Powering On the Projector
1. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn orange or red
(*)
.
2. Turn on the lamp by pressing “POWER ON” on the remote
control or on the control panel. The Power LED will flash
blue.
The startup screen (NEC logo) will display and the
Power LED will turn blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
If you connect multiple sources at the same time, use the
SOURCE button on the control panel or use “COMPUTER
1
”, “COMPUTER 2”, “S-VIDEO”, “VIDEO”, “HDMI”on the
remote control to switch inputs.
Powering On/Off the Projector
Turn on the projector
first and then the signal
sources.
or
(*)When “Power-
Saving” is selected for
“Standby Mode”,the
Power LED will turn
red: when “Normal” is
selected for “Standby
Mode”, the Power LED
will turn orange.
Before using the
projector, remove the
mirror cover.
