10-6
“Confidential, Do Not Duplicate without written authorization from NEC.”
SETTING & ADJUSTMENT
C. Zoom / Focus Calibration
You must setup lens before power in.
If you are first calibration
You will see zoom / focus limit is 10000
Then you must check lens type.
Use “l?” to check lens type.
If it is “1”, it means the lens not encoder.
So you can’t use the lens to calibration.
If check ok, use “zfc” to calibration.
If it is done, you’ll see the some value of zoom / focus.
How To calculation / Setting Lens Shift per cent
IF up limit ranger is “a”, then it shift range is a/y > 122.6% at WUXGA
IF down limit ranger is “b”, then it shift range is b/y > 105.4% at WUXGA
IF right limit ranger is “c”, then it shift range is c/x > 27.2% at WUXGA
IF left limit ranger is “d”, then it shift range is d/x > 27.2% at WUXGA
x
y
Summary of Contents for NP-NC900C-A
Page 199: ......
