![background image](http://html.mh-extra.com/html/nec/nlt-32hdb4/nlt-32hdb4_owners-manual_249226016.webp)
Power ON/OFF: The Display is in Standby mode
- Press POWER ( ) button on the remote control or on
the side panel to turn on the unit.
The power indicator changes from red to green.
- Press POWER ( ) button on the remote control or on
the side panel again to return the display to standby
mode. The power indicator changes from green to red.
Selection of Input Mode
- Press the INPUT button to display the signal source
menu.
- press or button to select the signal source you
desired, then press the Enter button to confirm.
TV
AV
S-Video
YP
B
P
R1
Main
15
Basic Operation
RS-32PX
TELETEXT
RS-32PX
POWER
INPUT
VGA
HDMI
YP
B
P
R2
Please make sure the main power switch is
in the "ON" position.
NOTE: When turning the unit "OFF" using the main power
switch, please wait for at least 2 seconds before turning
the main power switch to "ON" to allow the unit to reset.
OSD Option Adjustment
Learning about the menu system
After you have installed the batteries into the remote
control, you may want to set some preferences on
the PDP using the menu system.
- The buttons for OSD option adjustment include:
Menu, , Enter and Exit buttons.
- Press the Menu button to open the OSD Menu then
press or button to select the pages.
The pages are displayed in the following sequence
(circular display):
Video
Audio TV Setup Parental
Note: TV menu page is only for TV mode.
, , ,
Brightness
Contrast
Saturation
HUE
Sharpness
Color Temperature
Advanced Video
Audio
TV
Setup
Parental
50
50
50
0
5
Video
Video
Select
Enter
ENTER
EXIT
Exit
Picture Mode
Vivid