![background image](http://html.mh-extra.com/html/nec/nlt-32hdb4/nlt-32hdb4_owners-manual_249226015.webp)
Initial Setup Instruction Guide
Connect the power and antenna to your television; then
turn on the TV. The first time you use your LCD the initial
setup menu Welcome will appear on the screen:
“
”
Operate as follows:
1. Press the Enter button to enter the initial setup menu
4. The Initial Setup menu will read Complete after
the scanning is finished.
Press the Enter button to exit.
“
”
Note: Initial setup is for the TV stations only.
1. If you don’t select Scan to start the scanning in the
initial setup menu Channel Scan , the process will
repeat itself the next time you turn on your television.
2. If you would like to end the scanning process, press the
Exit button to exit.
If you would like to scan for stations again, select
Channel Scan in the TV menu.
“
”
“
”
“
”
Initial Setup
Welcome
Welcome to use Wizard for
Initial Setup !!
Please press [ENTER] to start the
wizard.
Initial Setup
Skip Scan
Back
Next
Exit
Select
EXIT
First,please connect antenna.
Start channel scan now?
If you skip this step, the channel
scan could be performed in Menu.
Channel Scan
Scan
0%
Initial Setup
Cancel
EXIT
The channel scan may take a while
to complete.
Status: Scanning
Analog Channels: 0
Digital Channels: 0
Channel Scan
51%
Initial Setup
Congratulations !!
Completed Initial Setup.
Complete
Back
Please press [ENTER] to exit the
wizard.
3. Press or Enter button to confirm your selection.
* When select Scan , Press or Enter button to start the
scanning.
* When select Skip Scan , Press or Enter button to skip
the scanning.
* Analog Channels will be tune in starting from 900.
“
”
“
”
2. Press
or button to select Scan or Skip Scan .
“
”
“
”
14
Basic Operation
Please make sure the main power switch is
in the"ON" position.