Installation
3
EN
Power
This set operates on an AC mains supply, the voltage is as
indicated on the label on the back cover. Never apply DC
power to the set. In the event of thunderstorms or powercuts,
please pull out the aerial and mains plugs.
Warning
- To prevent fire or shock hazard, do not expose the set to
rain or moisture. Do not rub or strike the Active Matrix
LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
- The appliance is not intended for use by young children
or infirm persons without supervision.
- Young children should be supervised to ensure that they
do not play with the appliance.
- Avoid displaying fixed pattern in the monitor for long
period of time to avoid image persistence.
Service
Never remove the back cover of the set as this can expose
you to very high voltage and other hazards. If the set does
not operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked
+
75
Ω
on
the back cover. For the best reception an outdoor aerial
should be used.
Location
Position your set so that no bright light or sunlight falls
directly onto the screen. Care should be taken not to
expose the set to any unnecessary vibration, moisture,
dust or heat.
Also ensure that the set is placed in a position to allow a
free flow of air. Do not cover the ventilation openings on
the back cover.
Cleaning
Unplug the set before cleaning the face of the LCD Screen.
Dust the set by wiping the screen and the cabinet with a
soft, clean cloth. If the screen requires additional cleaning,
use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
The LCD panel is very high technology product
with about million thin film transistors, giving
you fine picture details, Occasionally, a few
non-active pixels may appear on the screen as
a fixed point of blue, green or red. please note
that this does affect the performance of your
product.
