2
© NEC Corporation 2017
1.
Preparation
1.1.
Check the Power Plugs
Please check that all power plugs are connected to the back of server.
1.2.
Check the NICs
1.2.1.
Production Network
Please check that all Network Interface Cards are connected as required. This means the two
dual port adapters mounted in slots number 9 and 16 should be connected. These 4 1GB ports
are bonded by the OS driver. For your reference please see the numbers on top of the PCI slot.
The below image does not contain NICs in these slots.
1.2.2.
Management Network
Please check that at least one of both management adapters (MGB1 Management and MGB2
Management) is connected to the network. With this connection you can monitor your hardware
health.
1.3.
External Storage (JBOD)
Please connect the external storage to the 2
nd
RAID controller.
The RAID controller is mounted in PCI slot 12. Please connect its port “A” to port “0” of the JBOD.
Please connect two power cables to the external storage as well.
