Chapter 5 Feature Description
Least Cost Routing - 3/6 Digit
NEAX2000 IVS
2
General Description
NDA-24293, Issue 2
Page 59
Least Cost Routing - 3/6 Digit
This service feature allows the NEAX2000 IVS
2
to be programmed to route outgoing
calls over the most economical facility (WATS, FX, DDD). Based on the individual
area code and office code dialed (6-digit analysis), the system examines the
programmed tables and uses the trunk in the order specified.
Line Lockout
This feature automatically releases a station from the common equipment if the station
remains off-hook for longer than a programmed interval before dialing. Howler tone
may be programmed to be sent to the station in Line Lockout.
Line Pre-selection
This feature provides the station user with two ways to select an idle, held, recalling,
or ringing line before going off-hook.
Maid Status
This feature allows the Hotel/Motel (H/M) Front Desk Instrument, Property
Management System (PMS) terminal, or guest room station (using special access
code) to register the condition of each guest room.
Maintenance Administration Terminal (MAT)
The Maintenance Administration Terminal (MAT) is a Personal Computer (PC) used
for programming and maintenance of the NEAX2000 IVS
2
. The MAT can provide a
Maintenance Printout, Peg Count information and fault message output. Additionally,
the MAT can be used to Remove and Restore to Service any station in the system and
can read or save system data from disks. The MAT can assign the Key Data for the
Attendant Console.
Message Center Interface (MCI)
This feature provides an interface with a customer supplied Voice Mail System
(VMS) which can send Message Waiting lamp control data to the NEAX2000 IVS
2
.
Message Registration
This feature provides output from the system to a call accounting system using an
RS-232C connector. This allows the Hotel/Motel clerk to retrieve the information
needed to charge for local and toll calls.
