NEAX2000
IVS
2
Remote PIM System Manual
Page 8
ND-70917 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Required Equipment
REQUIRED EQUIPMENT
Table 1-2
shows the required equipment for providing the Remote PIM System.
Table 1-2 Required Equipmen t
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PN-DAIA
DAI
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor and BUS interface
One through three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
PN-DAIB
DAI
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
PN-DAIC
DAI
T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Channel
Expansion Card
Accommodates 24-channel PCM digital lines
One through six cards can be provided at the Main Site.
Two cards can be provided at the Remote Site.
PN-DAID
DAI
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor and BUS interface
One though three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
PN-DAIE
DAI
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
PN-DAIF
DAI
E1 Digital Trunk Interface (2 Mbps) Channel Expansion Card
Accommodates 30-channel PCM digital lines
One through three cards can be provided at the Main Site.
One card can be provided at the Remote Site.