ND-70348 (E)
CHAPTER 4
Page 683
Revision 3.0
ATSTN
ATSTN: Assignment of Telephone Number and Station Number for NDM
1. General
This command is used to assign both Telephone Number (TELN) and Physical Station Number. As the function
of ALGSN and ASDT commands are combined to this command, Physical Station Number can be assigned at
the same time when assigning the Telephone Number. If the Telephone Number is deleted, also the allocated
Station Number can be deleted. The data assigned by this command is written in Network Data Memory (NDM)
of the Network Control Node (NCN), updating the NDM at each Local Node (LN).
2. Precautions
1.
This command can be used only when logging in to NCN.
2.
If the Telephone Number is deleted by this command, the station data assigned at ASDT command is also
to be deleted. When you want to delete the allocated Telephone Number only, use ALGSN command.
3.
To delete the ASDT data is failed, only the deletion of allocated Telephone Number is activated.
4.
This command is available since Release 7 software enhancement.
