CHAPTER 5
NDA-24299
Page 72
Revision 1.0
DATA PROGRAMMING
Assignment of Numbering Data for Telephone Numbers
STEP 3:
ASPAN
Assign special access code data for the telephone numbers using the ASPAN command. SRV=TELN
is the data for telephone numbers.
and
show a sample data sheet and
command display for ASPAN.
Figure 5-17 ASPAN Sample Data Sheet
Figure 5-18 ASPAN Command Display
Note:
The Numbering Plan data for the LDM and/or NDM cannot use separate Tenant Numbers (TN), so be sure
to assign the following data on the ASYDL command.
•
ASYDL command, SYS1, INDEX 800
b1 = 1 (ASPAL command tenant data table development on LDM = Common)
b2 = 1 (ANPDL command tenant data table development on LDM = Common)
SRV (Kind of Service)
TELN: Telephone Number
- ASPAN Data Sheet (example)
- NCN (Node A)
4 x x x x x
Telephone Number
6 digits
TN = 1 ACC = 4 CI = N (Normal) SRV = TELN NND = 6
TN = 1 ACC = 4 CI = H (Hooking) SRV = TELN NND = 6
Note:
Available SRV is telephone number only. For more information, see the “Office Data Specification”.
ACC (Access Code): max 6 digits
CI (Connection Index)
N: Normal
H: Hooking
B: Busy
NND (Maximum Number of Digits):
1 - 16 (digits)
SRV (Kind of Service)
TELN: Telephone Number
Note
1
TN
SRV
TELN
ASPAN (Assignment of Special Access Code Data for Network Data Memory)
4
1st DC
CI
NND
N
6