NEC NE3108-007, User Manual

Page: 24 / 27

- 24 -
11.58
～
11.79mm
based on ISO standard.
The width of the root portion of a plug should
use the cable within 12mm.
less than12mm
cable boots
Refer to the left figure
which does not get
used to use for the
cable with boots (with
a connector cover).
* The cable with boots
causes
of poor
contact and a
connector breakage.
Good Bad
4. Network Cable
Connector RJ45
Type
Twisted Pair Cable ( UTP / STP ) must be 4pair wiring.
Make sure you use cable that complies with the TIA-568 wiring
specification.
Cable
Category
10BASE-T: Cat.3 or better,
100BASETX : Cat.5 or better
1000BASE-T Cat.5e or better
Length 100 m (max.)
Limitation of NE3108-008
Cables connected to servers will charge static electricity by
friction against the floor. Use of static removal tool for cables is
recommended before connecting them to avoid servers from
destruction.
To prevent any damage on components due to static electricity, make
sure to discharge static electricity from yourself before you touch the
adapter.
Firmly connect the network cable
When connecting the cable, insert the cable connector until you hear a
click sound.